Index: trunk/kernel/admin/include/help/install.txt
===================================================================
diff -u -r49 -r62
--- trunk/kernel/admin/include/help/install.txt (.../install.txt) (revision 49)
+++ trunk/kernel/admin/include/help/install.txt (.../install.txt) (revision 62)
@@ -1 +1,61 @@
-INSTALLATION & GETTING STARTED
\ No newline at end of file
+
+Please fill out the database connection information (server location is usually localhost , and you can find out the database name/user/password combination from your server administrator, or in the hosting account's Control Panel) .
+You may then choose a table prefix that will be preceding all of database table names used by In-portal Platform and modules. This option is useful when you are installing more then one copy of the In-portal Platform on the same database, or if it is sharing the same database with another application and you want to prevent the table naming conflicts.
+
+All life or production installations of the In-portal Platform and any modules require a valid license obtained from Intechnic Corporation. A local or development installation, which is not accessible from the Internet (has a non-routable IP) and is used only for demonstration or development purposes, does not require a license. For more details, please go to http://www.in-portal.net or see the chapter 2 above.
+There are two options for selecting a license:
+ Download from Intechnic: in order to download the license directly from Intechnic, you must have a registered account ( http://www.intechnic.com/myaccount ). If your server allows outbound Internet connections (most servers do), you can use the My Account login to download the license automatically. The installation script will guide you through the remaining process, if this option is selected.
+ Upload License File: you may upload the license file if you choose this option. The license file can be obtained from the My Web Sites section of the My Account ( http://www.intechnic.com/myaccount ). This option is useful if you are installing In-portal on your local server, without the access to the Internet.
+
+This screen will show you all domains, which are valid for the license you have picked, or all local domains, which are available. Please select the domain where you want the In-portal site to re side .
+In the �other domain� field, you may enter an IP address, if you do not wish to use a domain name, or a local computer name.
+
+This screen of the installation script will prompt you to enter a root password for your In-portal system. The root access is the highest-level (superuser) access into the system. It is not designed for daily use, but rather reserved for the In-portal administrator to perform major system operations, and to create additional administrative users.
+Please take extra care not to loose your root password. If you do so, and you do not have any other administrative users set up, you will permanently loose access to your Administrative Console.
+
+The installation script will automatically determine which modules' program files are uploaded to your �in-portal' directory and are available for installation. This screen will allow you to select the modules that you want installed at this time.
+If the desired module is not listed, it is because you did not upload it to the correct location. Please double check that the module program files have been uploaded directly under your �in-portal' directory. For example, the In-link module should be located in the �in-portal/in-link' directory. It is also possible that you do not have the appropriate license for this module on this domain.
+
+This screen you will prompt you to select the regional packages you want to install. In-portal Platform version 1.0.4 comes with a default regional package. Additional regional packages may be available for download from our web site ( http://www.in-portal.net/ ).
+You can add more regional packages through the Administrative Console later. Please see the section 5.2.5.3 of this manual for more information. Also, please note, that at least one regional package must be enabled during the initial installation; otherwise, you will not be able to operate your Administrative Console.
+
+This step will allow you to select the default language for your system. You can change the default language from the Administration Console later. Please see the section 5.2.5.3 of this manual for more information.
+
+The next few screens will allow you to configure the default options for the In-portal Platform and the modules you have installed. All of these settings can be changed later through the Administrative Console.
+ In-portal Platform Settings, part 1
+ Web address: The full directory path where your In-portal system is located. It is the portion of the URL that comes directly after the domain name. Example: if the URL is http://www.in-portal.net/demo/ , then the full path is �/demo/' . Please note, that the preceding and the trailing slashes are required. The installation script will detect the full path automatically and you only need to change it in the event of a non-standard web server configuration.
+ Website name: The title of your site that will appear in the browser title bar. For example, �My Website�, or any other arbitrary text.
+ Session Management Method: Choose between �Query String', �Cookies' or �Automatic'. For more information, see section 5.2.5.1 of this manual.
+ Session Inactivity Timeout (seconds): Set the timeout (in seconds), after which all inactive users (both front-end and administrative) will be automatically logged out. This is an important security feature, and it is not recommended to set the session expiration to more than 3600 seconds (1 hour).
+ Time zone of the server: Please select the time zone of your server's location. You can find out this information from your server administrator.
+ Time zone of the site: Please select the time zone for your web site. Please note that this can be different from the time zone of the server, depending on your geographical location. This setting will allow you to see the accurate date/time stamps recorded by the system.
+ Mail Server Address: You need to set this field only if you are planning to use an external mail server for the outgoing mail generated by In-portal. Leaving it blank will use your web server's default mail transport.
+ Port (e.g. port 25): Set the SMTP port of your external mail server. You need to set this field only if you are planning to use an external mail server for the outgoing mail generated by In-portal.
+ Server Requires Authentication: Check this if your SMTP server requires a user name and a password to send mail through (this is common on the newer mail systems). You need to set this field only if you are planning to use an external mail server for the outgoing mail generated by In-portal.
+ Mail Server Username: Enter the user name for your SMTP server. You need to fill out this field only if you are planning to use an external mail server for the outgoing mail generated by In-portal.
+ Mail Server Password: Enter the password for your SMTP server. You need to fill out this field only if you are planning to use an external mail server for the outgoing mail generated by In-portal.
+ Messages from Site Admin are from: Enter the email address that will appear as the FROM address on all automatically generated email messages. This should be a real email address to enable users to reply, and to receive failed message notifications. This field must be changed from its default value.
+ In-portal Platform Settings, part 2
+ Allow new user registration: This designates how your new users will be registering through the front end. �Instant' means that they will automatically be enabled after the registration. This option is useful for sites that anticipate a large user base, and do not need a high level of security. The �Not Allowed' option will unconditionally deny registration on the front-end. The administrator will still be able to create front-end users through the Administrative Console. This is the highest security setting. The �Upon Approval' option is for administrators who want to approve manually the user registrations. This is the default option.
+ Assign registered users to group: If you have allowed user registration in the above question, this option will designate a group, to which all newly registered users will be assigned. To learn more about groups, please see section 4.2.3 of this manual * .
+ Assign users not logged in to group: In order to manage permissions for your site's visitors (people who have come to your site, but have not logged in), you will need to designate a group in this question. To learn more about groups, please see section 4.2.3 of this manual * .
+ Assign mailing list subscribers to group: Here you can choose which group will be designated for the users, who choose to use the �subscribe' option on the front end * .
+ Assign password automatically: Checking this option will let the In-portal Platform automatically generate random passwords for new users, and send them to the user in the registration email. This is a good way to verify the existence of a user's email � if they do not receive the email with the password, they will not be able to log in. The users will be able to set their own password later.
+ Number of days to deny multiple votes from the same user: This setting controls how often the same user can vote on the same resource or item. For example, if you set it to 3 days, a user will not be able to vote on the same link for 3 days after their first vote.
+ Number of days to deny multiple reviews from the same user: This setting controls how often the same user can create reviews for the same item. For example, if you set it to 3 days, a user will not be able to create a new review for the same link for 3 days after their first one.
+ In-portal Platform Settings, part 3
+ Order categories by: This setting specifies the default primary sort order for categories in lists (both front end and Administrative Console).
+ And then by: This setting specifies the default secondary sort order for categories in lists (both front end and Administrative Console).
+ Number of categories per page: This setting specifies the default number of categories to be shown on one page.
+ Categories Per Page (Shortlist): This setting specifies the default number of categories to be shown on one page, when viewed as a short list on the front end.
+ Number of days for a cat. to be NEW: This setting specifies how many days a category will keep its �new' status. The �new' status can be individually changed for each category, but the default value is �automatic', which will use this setting.
+ Display editor PICKs above regular categories: Checking this option will force the Editor's Pick categories to be listed above the regular categories. The Editor's Pick setting will take precedence over any other priority setting.
+ Root category name (language variable): Enter the name of a language variable, which will designate the name of the root category. The default variable name is �lu_rootcategory_name', and in English it has a value of �Home'. Usually you don't need to change the variable name, because you can change the value of the variable just as easily. For more information about languages, please see section 4.2.6 of this manual.
+ Default META Keywords: Enter text here that will be displayed as a default META keyword tag on the front-end pages. If a category will have its own META keyword tag, it will take precedence over this setting. You may also leave it blank.
+ Default META description: Enter text here that will be displayed as a default META description tag on the front-end pages. If a category will have its own META description tag, it will take precedence over this setting. You may also leave it blank.
+ In-portal Platform Settings, part 4
+ Default Theme: Choose the default theme. The only selection here will be the themes that you have already uploaded to your �in-portal/themes' directory. The default installation of 1.0.4 comes with one theme called �Default'. Additional themes may be available for download on our web site: http://www.in-portal.net/
+
+Congratulations! You have completed your In-portal installation. Clicking �Continue' will take you to your new Administrative Console.
+Please remember to log in with the user name �root' and the password that you have assigned in the step 4.
+* You will be selecting from a predefined list of groups here. Later, in Administrative Console, you will be able to create your own groups, and change these settings, if necessary.
Index: trunk/admin/help/install_help.php
===================================================================
diff -u -r49 -r62
--- trunk/admin/help/install_help.php (.../install_help.php) (revision 49)
+++ trunk/admin/help/install_help.php (.../install_help.php) (revision 62)
@@ -122,7 +122,6 @@
|
-
|